Go here for replacement 4" components (RIGS or WHEELS)
Rig Model
Wheel Dimensions
Dynamic Load
Swivel Radius
Load Height
4.04109
4" x 2"
Up to 1000 lbs.
3-9/16" W/O Brk
5-5/8"
Swivel Rig NO Brake Price:
$ 9.06
Zinc
Plated Finish
Full Double Ball Hardened Raceways
1/2" Hollow Axle with Grease Zerk Fittings.
1/4" Steel Top Plate
Permanent 5/8" Rivet King Pin
Swivel Radius with wheel 3-9/16"
Swivel Rig with Brake BRK1 Rig
and Brake Price: $ 23.25
Toe
activated brake features positive engagement with wheel tread via rubber faced plate. Brake is adjustable.
Swivel Radius: 6-1/8"
Swivel Rig with Brake BRK2 Rig
and Brake Price: $ 16.68
Brake
is constructed of durable, light-weight engineered thermoplastics. Ideally suited for wet or corrosive conditions. Toe operation holds heavy loads securely. Advanced design of the brake pad holds a variety of wheel types. Only two moving parts. Virtually maintenance free operation.
Temperature
range: -30deg. to +250deg. F.
Swivel Radius: 5-7/8"
Swivel Rig with Brake BRK3 Rig
and Brake Price: $ 14.20
Brake
design places a positive locking force against the wheel hub to hold loads securely. Large foot pedal makes brake easier to operate and provides better foot placement. Brake can be operated from either end of the pedal for greater convenience.
Swivel Radius: 5"
Rigid Rig Price
$ 5.50
Zinc
Plated Finish
1/2" Hollow Axle with Grease Zerk Fittings.
1/4" Steel Top Plate
WHEELS
PERFORMA
Performa wheels offer the advantages of both hard and soft tread materials in a single wheel. Like a hard tread wheel, Performa rolls easily and is very durable. Like a soft tread wheel, it rolls quietly, protects floors and resists impacts with a cushion ride. It also features maximum weatherability, low temperature flexibility, resistance to chemicals, water and steam, and rejects floor debris such as metal shavings. Thermoplastic tread is permanently bonded to ribbed polyolefin wheel core.
Temperature Range: -45deg. to 180deg. F. intermittent service. (120deg F. continuous service.)
Capacity: 350 lbs. each
Hardness: 65(+/-5) Durometer Shore A scale
Performa Whl with Roller Bearing
Price +$ 10.46
Performa Whl with Delrin Bearing
Price + $ 9.92
Performa Whl with Ball Bearing
Price +$ 12.04
POLYURETHANE
Industrial strength polyurethane tread bonded to "ribbed" polyolefin core. This design adds strength for loads subjected to shock and hard impacts. Tread is molded in, around and through a ribbed extension of the core to prevent debonding. Standard colors are red tread on grey core.
Temperature Range: -45deg. to 180deg. F.
Capacity: 600 lbs. each for Roller Bearing and Delrin bearing, 500 lbs. each for Ball Bearing.
Hardness: 55(+/-5) Durometer Shore d scale Not
recommended for conditions of continuous operation such as tow-line, etc.
Polyurethane Whl with Roller Bearing
Price +$ 10.28
Polyurethane Whl with Delrin Bearing
Price + $ 9.74
Polyurethane Whl with Ball Bearing
Price +$ 11.86
MAXIM
Colson Maxim wheels feature an exclusive, ultra-tough thermoplastic compound that resists hard impacts and drop-shocks. The wheel is impervious to most chemicals, solvents, salts, gases, alkalines and steam cleaning and does not absorb water. When compared to other hard tread wheels, Maxim wheels require less force to roll and swivel. It is ideal for many industrial and institutional applications and is NSF listed for food service industry. The wheel is non-marking.
Temperature Range: -45deg. to 180deg. F. (+350deg. F. If metal retaining washers are used on roller bearings.)
Capacity: 800 lbs. each for Roller Bearing and Delrin bearing, 500 lbs. each for Ball Bearing.
Hardness: 85(+/-5) Durometer Shore D scale
Maxim Whl with Roller Bearing
Price +$ 5.74
Maxim Whl with Delrin Bearing
Price +$ 5.20
Maxim Whl with Ball Bearing
Price +$ 7.32
MOLDON RUBBER CAST
IRON CORE
Moldon Rubber is bonded to cast iron core. These wheels are quiet in operation and absorb shock and vibration. They help prolong equipment life and protect cargo.
Temperature Range: -45deg. to 160deg. F.
Capacity: 400 lbs. each.
Hardness: 70(+/-5) Durometer Shore A scale
MOR-CI Whl with Roller Bearing
Price +$ 6.98
MOR-CI Whl with Delrin Bearing
Price +$ 6.44
MOR-CI Whl with Ball Bearing
Price +$ 8.56
PHENOLIC
Phenolic resin wheels filled with macerated fabric. Quieter than steel or aluminum, provides superior floor protection. Resistant to hard impacts and most chemicals and steam. Standard color is black.
Temperature Range: -45deg. to 180deg. F. (+250deg. F. If metal retaining washers are used on roller bearings.)
Capacity: 400 lbs. each.
Hardness: 90(+/-5) Durometer Shore D scale
Phenolic Whl with Roller Bearing
Price +$ 6.80
Phenolic Whl with Delrin Bearing
Price +$ 6.26
Phenolic Whl with Ball Bearing
Price +$ 8.38
CAST IRON
These should be specified when excessive load weights are involved and floor protection in not a factor. High strength to withstand sharp impacts. They should not be used if noise is of major concern or if loads are fragile.
Temperature Range: -45deg. to 180deg. F. (+500deg. F. If metal retaining washers are used on roller bearings.)
Capacity: 1000 lbs. each. for Roller Bearing and Delrin bearing, 500 lbs. each for Ball Bearing.
Cast Iron Whl with Roller Bearing
Price +$ 11.10
Cast Iron Whl with Delrin Bearing
Price +$ 10.56
Cast Iron Whl with Ball Bearing
Price +$ 12.68
Quantity:
All Rigs have the following bolt hole pattern
This picture may display and print out of proportions use the measurements to be sure.
